Snap On Battery Charger Repair Parts

Can You Use Any Charger With Any Cell Phone, Laptop, Camera, or Tablet? 

Every cell phone, laptop, and tablet seem to come with their own charger.  If you’re like me, you have probably compiled a number of chargers through the years.  So the question becomes: is it safe to use a charger with your phone, laptop, camera, or tablet that isn’t the original manufacturer’s charger which came with the device?

Types of Chargers

In this article, we will focus on three types of chargers: laptop chargers, micro USB chargers (these are used with telephones, tablet computers, and cameras), and Apple Lightning Connectors.  While some devices have chargers with a slightly different head or charging cable, these are the most frequent.

Laptop chargers are rather unique to the device they come with.  However, there may be some generic chargers which boast the ability to be interchanged between laptops.  This always requires changing of this charger”head” and might not be the optimal charging amperage or voltage for your device.

Micro USBs are theoretically designed to be interchangeable, and are standard in many smartphones, Android apparatus, and tablets.  Micro USB chargers typically have the same voltage, but may draw different amps.  I will explain this further later and how to know whether the charger is safe to use (based on its listed amps and voltage).

Apple Lightning Connectors are standard on all new Apple devices, such as iPads and iPods. For older devices with a 30-pin charge port, a connector can be used to control the Lightning Connector.

The Plugs Must Be The Same

For a charger to be used on a different device, it’s essential that the plug  of the charger (the”head”) fit securely into the charging port of the device.  Micro USBs are the same across the board as far as charging heads, while laptop chargers are usually specific to both make and model.  However, the plug fitting firmly is just one part of this equation.

How Voltage and Amperage Matter

Somewhere on the power brick of the charger you will get a tag with the charger’s voltage (V) and amperage (A).  For laptop chargers, this charging brick is often halfway down the charger and appears exactly like it sounds — a brick. For other types of chargers, like a smartphone charger, this information is usually found at the base of the charger, where it would meet the wall.  For the device you’re attempting to charge, the voltage and amperage required will be found on the battery that came with the device or on the manufacturer’s website.

Voltage is how much power the charger will draw into the device, or how much is being”pushed” into the apparatus by the charger.  A phone will usually pull up to approximately 5V, though a laptop can pull up to 25V.  A charger must equal the voltage needed by the device. 

Amperage is how quickly power is”pulled” into the apparatus, or how much power is used by the device.  The quantity of volts won’t ever change, but the amount of amps that the system pulls may change depending on how hard the device is working.  The number that you locate on the battery that came with your device will be the max amount of amps which may be pulled from the device.  To be able to exchange chargers, the amp number on the charger must equal or exceed the amp number recorded on the device’s battery. If a device is paired with a charger that cannot support the amp necessity, it can burn out the power source and kill the device.

So for those who have a modern USB device (smart phone, tablet, or camera) you can plug into a high-amperage USB port and enjoy quicker charging (as long as the voltage is equal).  *Website Note: if you have an older device, it may not work with USB interfaces that employ the new Battery Charging Specification.

If The Micro USB  Charger’s Voltage Is Not 5v…

Some devices may have their voltage recorded with a plus/minus on it like that: 5v +- 5%.  If this is the case, you can use a charger rated at 4.75 to 5.25v because that rating is telling you is that the device can take 5v minus 5 percent of 5v = 4.75 volts  OR  5v plus 5 percent of 5v = 5.25 volts. 

An interesting thing to note is all chargers supply a higher voltage than the batteries that they charge.  That’s pretty much how they work.  There needs to be a voltage differential to generate the necessary current flow in the correct direction to charge the battery.  If you look at your vehicle, it’s a 12V battery, but average alternators provide 13.8 to 14.4V charging voltage to the battery.

Stay Away From Cheap Knockoff Chargers

The problem with knockoffs, especially cheap knockoffs, is they often don’t support the power requirements of the apparatus, or aren’t built to keep a steady flow safely.  This can result in damage to the device but can also pose a safety/fire hazard. Overall, it’s better to stay with the charger made for the device you are using.

Now You Understand How to Safely & Effectively Swap Chargers

I hope this article was able to help you.  Now you know how to safely and efficiently use a charger that did not include your smart phone, laptop, camera, tabletcomputer, or other apparatus.  Make certain you follow exactly what we said and you should be ready to go!