Ryobi One Battery Repair

Can You Use Any Charger With Any Cell Phone, Laptop, Camera, or Tablet? 

Every mobile phone, notebook, and tablet seem to come with their own charger.  If you are like me, you have probably compiled a number of chargers through the years.  So the question becomes: is it safe to use a charger with your phone, laptop, camera, or tablet computer that is not the original manufacturer’s charger that came with the device?

Types of Chargers

In this article, we will concentrate on three types of chargers: laptop chargers, micro USB chargers (these are used with telephones, tablets, and cameras), and Apple Lightning Connectors.  Although some devices have chargers with a slightly different head or charging cable, these are the most frequent.

Laptop chargers are rather unique to the device they include.  However, there may be some generic chargers which boast the capability to be interchanged between notebooks.  This always requires changing of the charger”head” and might not be the optimal charging amperage or voltage for your device.

Micro USBs are theoretically designed to be interchangeable, and are standard in most smartphones, Android apparatus, and tablets.  Micro USB chargers typically have the same voltage, but may draw various amps.  I’ll explain this further later and how to know whether the charger is safe to use (depending on its recorded amps and voltage).

Apple Lightning Connectors are standard on all new Apple devices, such as iPads and iPods. For older devices using a 30-pin charge interface, a connector can be used to charge with the Lightning Connector.

For a charger to be used on another device, it’s essential that the plug  of the charger (the”head”) fit securely into the charging port of the device.  Micro USBs are the same across the board so far as charging heads, whilst notebook chargers are usually specific to both make and model.  However, the plug fitting firmly is just 1 part of the equation.

Somewhere on the power brick of the charger you’ll find a tag with the charger’s voltage (V) and amperage (A).  For laptop chargers, this charging brick is often halfway down the charger and typically looks exactly like it sounds — a brick. For other types of chargers, like a smartphone charger, this information is usually located at the bottom of the charger, in which it would meet the wall.  For the device you are attempting to charge, the voltage and amperage required will be found on the battery that came with the device or on the company’s website.

Voltage is how much power the charger will draw in the apparatus, or how much is being”pushed” into the device by the charger.  A phone will usually pull up to approximately 5V, though a laptop can pull up to 25V.  A charger must equal the voltage needed by the device.  This is important: drawing too high a voltage could short out the device and possibly even start a fire, while too low a voltage will fail to charge the battery.

Amperage is how quickly power is”pulled” to the apparatus, or how much power is used by the device.  The quantity of volts won’t ever change, but the amount of amps that the device pulls may change based on how hard the unit is working.  The number that you locate on the battery that came with your device will be the maximum amount of amps that may be pulled by the device.  The amount found on the charger is how many amps can be pulled simultaneously. If a unit is paired with a charger that cannot support the amp necessity, it can burn out the power supply and kill the apparatus.

So if you have a modern USB device (smart phone, tabletcomputer, or camera) you can plug into a high-amperage USB port and enjoy quicker charging (so long as the voltage is equivalent ).  *Site Note: if you have an older device, it may not work with USB ports that use the newest Battery Charging Specification.

If The Micro USB  Charger’s Voltage Isn’t 5v…

Some devices might have their voltage listed using a plus/minus on it like that: 5v +- 5%.  If this is true, you may use a charger rated at 4.75 to 5.25v because that score is telling you is that the apparatus can take 5v minus 5 percent of 5v = 4.75 volts  OR  5v and 5 percent of 5v = 5.25 volts.  This means anything between 4.75 t0 5.25v is safe to use (so long as the amperage of the charger is equivalent to or higher than the device’s listed amperage).

An interesting thing to note is all chargers supply a higher voltage than the batteries they charge.  That’s pretty much how they operate.  There has to be a voltage differential to generate the necessary current flow in the correct direction to charge the battery.  When you look at your vehicle, it has a 12V battery, but average alternators provide 13.8 to 14.4V charging voltage to the battery.

The problem with knockoffs, especially cheap knockoffs, is they frequently don’t support the power needs of the device, or aren’t built to maintain a steady flow securely.  Overall, it’s better to stay with the charger made for the device you are using.

Now You Understand How to Safely & Effectively Swap Chargers

I hope this article was able to help you.  Now you know how to safely and efficiently use a charger that did not include your smart phone, laptop, camera, tabletcomputer, or other device.  Be certain you follow what we said and you should be good to go!