Repair Nexus 6P Battery

Can You Use Any Charger With Any Cell Phone, Notebook, Camera, or Tablet? 

Every cell phone, laptop, and tablet appear to come with their own charger.  If you’re like me, you have probably compiled quite a few chargers through the years.  So the question becomes: is it safe to use a charger with your phone, notebook, camera, or tablet computer that isn’t the original manufacturer’s charger which came with the device?

Types of Chargers

In this article, we will focus on three types of chargers: laptop chargers, micro USB chargers (these are used with phones, tablets, and cameras), and Apple Lightning Connectors.  Although some devices have chargers with a slightly different head or charging cable, these are the most frequent.

Laptop chargers are fairly unique to the device they come with.  However, there can be some generic chargers which boast the ability to be interchanged between notebooks.  This always requires changing of this charger”head” and might not be the optimal charging amperage or voltage to your device.

Micro USBs are theoretically designed to be interchangeable, and are standard in most smartphones, Android devices, and tablets.  Micro USB chargers typically have the same voltage, but may draw different amps.  I’ll explain this further later and how to know whether the charger is safe to use (depending on its listed amps and voltage).

Apple Lightning Connectors are standard on all new Apple devices, such as iPads and iPods. For older devices with a 30-pin charge interface, a connector can be used to charge with the Lightning Connector.

The Plugs Must Be The Same

For a charger to be used on another device, it’s essential that the plug  of the charger (the”head”) fit securely into the charging port of the device.  Micro USBs are the same across the board so far as charging heads, while notebook chargers are often specific to both make and model.  However, the plug fitting firmly is just 1 part of this equation.

Determined by the power brick of the charger you’ll find a tag with the charger’s voltage (V) and amperage (A).  For notebook chargers, this charging brick is often halfway down the charger and appears exactly like it sounds — a brick. For other types of chargers, like a smartphone charger, this information is usually located at the base of the charger, in which it would meet up with the wall.  For the device you are attempting to charge, the voltage and amperage required will be seen on the battery that came with the device or on the manufacturer’s website.

Voltage is how much power the charger will draw into the apparatus, or just how much is being”pushed” into the apparatus by the charger.  A phone will usually pull up to approximately 5V, while a notebook can pull up to 25V.  A charger must equal the voltage required by the device. 

Amperage is how quickly power is”pulled” to the device, or how much electricity is used by the device.  The quantity of volts won’t ever change, but the amount of amps that the system pulls may change based on how hard the unit is working.  The number that you locate on the battery that came with your device are the max amount of amps which can be pulled by the device.  In order to swap chargers, the amp number on the charger must equal or exceed the amp number recorded on the device’s battery. If a unit is paired with a charger that cannot support the amp necessity, it can burn out the power supply and kill the apparatus.

So if you have a modern USB device (smart phone, tabletcomputer, or camera) you can plug into a high-amperage USB port and enjoy faster charging (as long as the voltage is equal).  *Website Note: if you have an older device, it may not work with USB ports that employ the new Battery Charging Specification.

If The Micro USB  Charger’s Voltage Is Not 5v…

Some devices might have their voltage recorded using a plus/minus on it like this: 5v +- 5%.  If this is the case, you can use a charger rated at 4.75 to 5.25v because that rating is telling you is that the device can take 5v minus 5 percent of 5v = 4.75 volts  OR  5v and 5% of 5v = 5.25 volts. 

An interesting point to note is all chargers supply a higher voltage than the batteries that they charge.  That is pretty much how they work.  There needs to be a voltage differential to produce the necessary current flow in the proper direction to charge the battery.  When you look at your car, it has a 12V battery, but average alternators provide 13.8 to 14.4V charging voltage to the battery.

The problem with knockoffs, especially cheap knockoffs, is that they often don’t support the power requirements of the apparatus, or are not built to maintain a steady flow safely.  This can result in damage to the device but can also pose a safety/fire hazard. Overall, it’s better to stay with the charger designed for the device you’re using.

Now You Know How To Safely & Effectively Swap Chargers

I hope this article was able to assist you.  Now you know how to safely and efficiently use a charger that did not come with your smart phone, laptop, camera, tablet, or other apparatus.  Be certain to follow what we said and you should be good to go!