Repair Dewalt 18V Xrp Battery

Can You Use Any Charger With Any Mobile Phone, Notebook, Camera, or Tablet? 

Every mobile phone, laptop, and tablet appear to come with their own charger.  If you’re like me, you have probably compiled quite a few chargers through the years.  So the question becomes: is it safe to use a charger with your phone, laptop, camera, or tablet computer that is not the original manufacturer’s charger which came with the device?

Types of Chargers

In this guide, we will concentrate on three types of chargers: laptop chargers, micro USB chargers (these are used with telephones, tablet computers, and cameras), and Apple Lightning Connectors.  While some devices have chargers with a slightly different head or charging cable, these are the most frequent.

Laptop chargers are rather unique to the device they come with.  However, there may be some generic chargers which boast the ability to be interchanged between notebooks.  This always requires changing of this charger”head” and may not be the best charging amperage or voltage to your device.

Micro USBs are designed to be interchangeable, and are standard in many smartphones, Android devices, and tablets.  Micro USB chargers typically have the same voltage, but may draw various amps.  I will explain this further later and how to know whether the charger is safe to use (depending on its recorded amps and voltage).

Apple Lightning Connectors are standard on all new Apple devices, such as iPads and iPods. For older devices using a 30-pin charge interface, a connector can be used to control the Lightning Connector.

In order for a charger to be used on a different device, it’s important that the plug  of the charger (the”head”) fit securely into the charging port of the unit.  Micro USBs are the same across the board so far as charging heads, while notebook chargers are usually specific to both make and model.  However, the plug fitting securely is only one part of the equation.

How Voltage and Amperage Matter

Somewhere on the power brick of the charger you’ll get a tag with the charger’s voltage (V) and amperage (A).  For other types of chargers, like a smartphone charger, this information is usually located at the base of the charger, in which it would meet up with the wall.  For the device you are trying to charge, the voltage and amperage required will be found on the battery that came with the device or on the manufacturer’s website.

Voltage is how much power the charger will draw into the apparatus, or just how much is being”pushed” into the device by the charger.  A phone will usually pull up to around 5V, though a notebook can pull up to 25V.  A charger must equal the voltage required by the device.  This is important: drawing too high of a voltage could short out the device and potentially even start a fire, while too low a voltage will fail to charge the battery.

Amperage is how fast power is”pulled” to the device, or how much electricity is used by the device.  The quantity of volts will never change, but the amount of amps that the system pulls may change depending on how hard the device is working.  The number that you find on the battery that came with your device will be the max amount of amps which can be pulled from the device.  The amount found on the charger is how many amps can be pulled at once. If a device is paired with a charger which can’t support the amp requirement, it can burn out the power supply and kill the device.

So if you have a modern USB device (smart phone, tablet, or camera) you can plug into a high-amperage USB port and enjoy faster charging (so long as the voltage is equivalent ).  *Site Note: if you have an older device, it might not work with USB ports that employ the newest Battery Charging Specification.

If The Micro USB  Charger’s Voltage Is Not 5v…

Some devices may have their voltage recorded with a plus/minus on it like that: 5v +- 5%.  If this is true, you can use a charger rated at 4.75 to 5.25v because that score is telling you is that the apparatus can take 5v minus 5% of 5v = 4.75 volts  OR  5v plus 5 percent of 5v = 5.25 volts. 

An interesting point to note is all chargers supply a higher voltage than the batteries that they charge.  That is pretty much how they work.  There needs to be a voltage differential to produce the necessary current flow in the correct direction to charge the battery.  If you look at your vehicle, it’s a 12V battery, but typical alternators provide 13.8 to 14.4V charging voltage to the battery.

Stay Away From Cheap Knockoff Chargers

The issue with knockoffs, especially cheap knockoffs, is that they often don’t support the power needs of the device, or are not built to maintain a steady flow safely.  Overall, it’s better to stick with the charger designed for the device you’re using.

Now You Understand How to Safely & Effectively Swap Chargers

I hope this article was able to help you.  Now you know how to safely and effectively use a charger that did not include your smart phone, notebook, camera, tabletcomputer, or other apparatus.  Make certain to follow what we said and you should be ready to go!