Can You Use Any Charger With Any Cell Phone, Laptop, Camera, or Tablet?
Every mobile phone, notebook, and tablet appear to come with their own charger. If you are like me, you’ve probably compiled a number of chargers through the years. So the question becomes: is it safe to use a charger with your phone, notebook, camera, or tablet that isn’t the original manufacturer’s charger that came with the device?
Kinds of Chargers
In this article, we’ll concentrate on three types of chargers: notebook chargers, micro USB chargers (these are used with telephones, tablet computers, and cameras), and Apple Lightning Connectors. Although some devices have chargers using a slightly different head or charging cable, these are the most frequent.
Laptop chargers are rather unique to the device they come with. However, there can be some generic chargers which boast the ability to be interchanged between notebooks. This always requires changing of this charger”head” and might not be the optimal charging amperage or voltage for your device.
Micro USBs are theoretically designed to be interchangeable, and are standard in many smartphones, Android apparatus, and tablets. Micro USB chargers typically have the exact same voltage, but may draw different amps. I will explain this further later and how to know whether the charger is safe to use (depending on its listed amps and voltage).
For older devices with a 30-pin charge port, a connector can be used to charge with the Lightning Connector.
In order for a charger to be used on a different device, it’s essential that the plug of the charger (the”head”) fit securely into the charging port of the device. Micro USBs are the same across the board so far as charging heads, while laptop chargers are often specific to both make and model. However, the plug fitting firmly is only 1 part of this equation.
Somewhere on the power brick of the charger you’ll get a tag with the charger’s voltage (V) and amperage (A). For other types of chargers, like a smartphone charger, this information is usually located at the bottom of the charger, in which it would meet up with the wall. For the device you’re trying to charge, the voltage and amperage required will be seen on the battery that came with the device or on the manufacturer’s website.
Voltage is how much power the charger will draw into the apparatus, or just how much is being”pushed” into the device by the charger. A phone will usually pull up to around 5V, though a laptop can pull up to 25V. A charger must equal the voltage needed by the device. This is important: drawing too high of a voltage could short out the device and potentially even begin a fire, while too low a voltage will fail to charge the battery.
Amperage is how fast power is”pulled” into the apparatus, or how much power is used by the device. The quantity of volts will never change, but the quantity of amps that the device pulls may change based on how hard the device is working. The number that you locate on the battery that came with your device will be the max amount of amps that can be pulled by the device. To be able to swap chargers, the amp number on the charger must equal or exceed the amp number listed on the device’s battery. If a unit is paired with a charger that cannot support the amp necessity, it can burn out the power source and kill the apparatus.
So for those who have a modern USB device (smart phone, tablet, or camera) you can plug into a high-amperage USB port and enjoy faster charging (as long as the voltage is equal). *Site Note: if you have an older device, it might not work with USB interfaces that use the newest Battery Charging Specification.
If The Micro USB Charger’s Voltage Is Not 5v…
Some devices may have their voltage recorded with a plus/minus on it like that: 5v +- 5%. If this is the case, you can use a charger rated at 4.75 to 5.25v because that score is telling you is that the device can take 5v minus 5 percent of 5v = 4.75 volts OR 5v plus 5% of 5v = 5.25 volts. This means anything between 4.75 t0 5.25v is safe to use (so long as the amperage of the charger is equivalent to or higher than the device’s listed amperage).
An interesting point to note is all chargers provide a higher voltage than the batteries that they charge. That’s pretty much how they operate. There has to be a voltage differential to generate the necessary current flow in the correct way to charge the battery. If you look at your vehicle, it’s a 12V battery, but typical alternators provide 13.8 to 14.4V charging voltage to the battery.
The problem with knockoffs, particularly cheap knockoffs, is they often don’t support the energy requirements of the device, or aren’t built to maintain a steady flow securely. Overall, it’s better to stay with the charger designed for the device you’re using.
Now You Understand How to Safely & Effectively Swap Chargers
I hope this article was able to help you. Now you know how to safely and effectively use a charger that did not include your smart phone, notebook, camera, tabletcomputer, or other apparatus. Make certain you follow what we said and you should be ready to go!