Can You Use Any Charger With Any Mobile Phone, Laptop, Camera, or Tablet?
Every mobile phone, laptop, and tablet seem to come with their own charger. If you are like me, you have probably compiled a number of chargers through the years. So the question becomes: is it safe to use a charger with your phone, laptop, camera, or tablet computer that isn’t the original manufacturer’s charger which came with the device?
Kinds of Chargers
In this article, we will focus on three types of chargers: laptop chargers, micro USB chargers (these are used with phones, tablets, and cameras), and Apple Lightning Connectors. Although some devices have chargers using a slightly different head or charging cable, these are the most common.
Laptop chargers are rather unique to the device they come with. However, there can be some generic chargers that boast the capability to be interchanged between laptops. This always requires changing of the charger”head” and might not be the best charging amperage or voltage for your device.
Micro USBs are theoretically designed to be interchangeable, and are standard in many smartphones, Android apparatus, and tablets. Micro USB chargers typically have the same voltage, but may draw different amps. I will explain this further later and how to know whether the charger is safe to use (based on its listed amps and voltage).
Apple Lightning Connectors are standard on all new Apple devices, such as iPads and iPods. For older devices with a 30-pin charge port, a connector can be used to charge with the Lightning Connector.
The Plugs Must Be The Same
In order for a charger to be used on another device, it’s essential that the plug of the charger (the”head”) fit snugly to the charging port of the device. Micro USBs are the same across the board so far as charging heads, while notebook chargers are usually specific to both make and model. However, the plug fitting firmly is just 1 part of the equation.
Determined by the power brick of the charger you’ll find a tag with the charger’s voltage (V) and amperage (A). For other types of chargers, like a smartphone charger, this information is usually found at the base of the charger, in which it would meet the wall. For the device you’re attempting to charge, the voltage and amperage required will be found on the battery that came with the device or on the manufacturer’s website.
Voltage is how much power the charger will draw into the device, or just how much is being”pushed” to the apparatus by the charger. A phone will usually pull up to around 5V, though a notebook can pull up to 25V. A charger must equal the voltage needed by the device.
Amperage is how fast power is”pulled” to the apparatus, or how much electricity is used by the device. The amount of volts won’t ever change, but the amount of amps that the device pulls may change depending on how hard the unit is working. The number that you locate on the battery that came with your device will be the max amount of amps which may be pulled from the device. The number found on the charger is how many amps can be pulled at once. To be able to exchange chargers, the amp number on the charger must equal or exceed the amp number listed on the device’s battery. If a device is paired with a charger that cannot support the amp necessity, it can burn out the power source and kill the apparatus.
So for those who have a modern USB device (smart phone, tablet, or camera) you can plug into a high-amperage USB port and enjoy quicker charging (as long as the voltage is equal). *Site Note: if you have an older device, it may not work with USB interfaces that use the new Battery Charging Specification.
If The Micro USB Charger’s Voltage Isn’t 5v…
Some devices may have their voltage listed using a plus/minus on it like that: 5v +- 5%. If this is the case, you can use a charger rated at 4.75 to 5.25v because that rating is telling you is that the apparatus can take 5v minus 5 percent of 5v = 4.75 volts OR 5v plus 5% of 5v = 5.25 volts. So this means anything between 4.75 t0 5.25v is safe to use (so long as the amperage of the charger is equal to or higher than the device’s listed amperage).
An interesting thing to note is all chargers supply a higher voltage than the batteries that they charge. That is pretty much how they work. There needs to be a voltage differential to generate the necessary current flow in the proper direction to charge the battery. If you look at your car, it has a 12V battery, but typical alternators provide 13.8 to 14.4V charging voltage to the battery.
Stay Away From Cheap Knockoff Chargers
The problem with knockoffs, particularly cheap knockoffs, is that they frequently don’t support the energy needs of the apparatus, or aren’t built to keep a steady flow safely. Overall, it’s best to stick with the charger designed for the device you are using.
Now You Know How To Safely & Effectively Swap Chargers
I hope this article was able to help you. Now you know how to safely and effectively use a charger that did not include your smart phone, laptop, camera, tabletcomputer, or other device. Be certain you follow exactly what we said and you should be ready to go!