Laptop Repair Compaq Presario Cq56 Cmos Battery Replacement

Can You Use Any Charger With Any Mobile Phone, Laptop, Camera, or Tablet? 

Every cell phone, notebook, and tablet seem to come with their own charger.  If you are like me, you’ve probably compiled a number of chargers over the years.  So the question becomes: is it safe to use a charger with your phone, laptop, camera, or tablet that is not the original manufacturer’s charger that came with the device?

Types of Chargers

In this article, we will focus on three types of chargers: notebook chargers, micro USB chargers (these are used with telephones, tablet computers, and cameras), and Apple Lightning Connectors.  While some devices have chargers with a slightly different head or charging cable, these are the most frequent.

Laptop chargers are fairly specific to the device they include.  However, there may be some generic chargers which boast the capability to be interchanged between notebooks.  This always requires changing of this charger”head” and might not be the optimal charging amperage or voltage for your device.

Micro USBs are theoretically designed to be interchangeable, and are standard in most smartphones, Android devices, and tablets.  Micro USB chargers typically have the same voltage, but may draw various amps.  I’ll explain this further later and how to know if the charger is safe to use (depending on its recorded amps and voltage).

Apple Lightning Connectors are standard on all new Apple devices, including iPads and iPods. For older devices using a 30-pin charge port, a connector can be used to control the Lightning Connector.

For a charger for use on another device, it’s important that the plug  of the charger (the”head”) fit securely into the charging port of the unit.  Micro USBs are the same across the board as far as charging heads, while notebook chargers are usually specific to both make and model.  However, the plug fitting firmly is only one part of the equation.

Somewhere on the power brick of the charger you’ll get a tag with the charger’s voltage (V) and amperage (A).  For other types of chargers, like a smartphone charger, this information is usually found at the bottom of the charger, in which it would meet up with the wall.  For the device you’re attempting to control, the voltage and amperage required will be seen on the battery that came with the device or on the manufacturer’s website.

Voltage is how much power the charger will draw in the apparatus, or just how much is being”pushed” into the apparatus by the charger.  A phone will usually pull up to around 5V, while a notebook can pull up to 25V.  A charger must equal the voltage needed by the device.  This is important: drawing too high of a voltage could short out the device and possibly even start a fire, while too low a voltage will fail to charge the battery.

Amperage is how quickly power is”pulled” into the apparatus, or how much power is used by the device.  The quantity of volts will never change, but the amount of amps that the device pulls may change depending on how hard the device is working.  The number that you locate on the battery that came with your device are the max amount of amps that can be pulled from the device.  If a device is paired with a charger which can’t support the amp requirement, it may burn out the power supply and kill the device.

So if you have a modern USB device (smart phone, tablet, or camera) you can plug into a high-amperage USB port and enjoy faster charging (as long as the voltage is equivalent ).  *Website Note: if you have an older device, it might not work with USB ports that use the new Battery Charging Specification.

If The Micro USB  Charger’s Voltage Is Not 5v…

Some devices might have their voltage listed with a plus/minus on it like this: 5v +- 5%.  If this is the case, you may use a charger rated at 4.75 to 5.25v because that score is telling you is that the apparatus can take 5v minus 5% of 5v = 4.75 volts  OR  5v plus 5% of 5v = 5.25 volts. 

An interesting point to note is all chargers provide a higher voltage than the batteries that they charge.  That is pretty much how they operate.  There needs to be a voltage differential to generate the necessary current flow in the correct way to charge the battery.  If you look at your vehicle, it’s a 12V battery, but typical alternators provide 13.8 to 14.4V charging voltage to the battery.

Stay Away From Cheap Knockoff Chargers

The problem with knockoffs, especially cheap knockoffs, is they often don’t support the energy requirements of the device, or are not built to maintain a steady flow securely.  Overall, it’s better to stay with the charger made for the device you’re using.

Now You Understand How to Safely & Effectively Swap Chargers

I hope this article was able to assist you.  Now you know how to safely and efficiently use a charger that did not include your smart phone, notebook, camera, tablet, or other apparatus.  Make certain you follow what we said and you should be good to go!