Ipod Classic Battery Connector Repair

Can You Use Any Charger With Any Cell Phone, Laptop, Camera, or Tablet? 

Every mobile phone, laptop, and tablet seem to come with their own charger.  If you’re like me, you’ve probably compiled quite a few chargers through the years.  So the question becomes: is it safe to use a charger with your phone, laptop, camera, or tablet computer that isn’t the original manufacturer’s charger which came with the device?

Types of Chargers

In this article, we will focus on three types of chargers: notebook chargers, micro USB chargers (these are used with phones, tablet computers, and cameras), and Apple Lightning Connectors.  Although some devices have chargers using a slightly different head or charging cable, these are the most common.

Laptop chargers are rather specific to the device they include.  However, there may be some generic chargers that boast the ability to be interchanged between notebooks.  This always requires changing of this charger”head” and might not be the best charging amperage or voltage for your device.

Micro USBs are designed to be interchangeable, and are standard in most smartphones, Android devices, and tablets.  Micro USB chargers typically have the same voltage, but may draw various amps.  I’ll explain this further later and how to know if the charger is safe to use (depending on its recorded amps and voltage).

Apple Lightning Connectors are standard on all new Apple devices, including iPads and iPods. For older devices using a 30-pin charge interface, a connector can be used to control the Lightning Connector.

In order for a charger for use on a different device, it’s important that the plug  of the charger (the”head”) fit securely into the charging port of the device.  Micro USBs are the same across the board so far as charging heads, while laptop chargers are usually specific to both make and model.  However, the plug fitting firmly is only 1 part of this equation.

Somewhere on the power brick of the charger you will get a tag with the charger’s voltage (V) and amperage (A).  For laptop chargers, this charging brick is often halfway down the charger and appears exactly like it sounds — a brick. For other types of chargers, like a smartphone charger, this information is usually located at the base of the charger, in which it would meet up with the wall.  For the device you’re trying to control, the voltage and amperage required will be found on the battery that came with the device or on the manufacturer’s website.

Voltage is how much power the charger will draw into the device, or just how much is being”pushed” to the apparatus by the charger.  A phone will usually pull up to approximately 5V, though a laptop can pull up to 25V.  A charger must equal the voltage required by the device. 

Amperage is how fast power is”pulled” into the device, or how much power is used by the device.  The amount of volts won’t ever change, but the quantity of amps that the device pulls may change based on how hard the unit is working.  The number that you find on the battery that came with your device are the max amount of amps which can be pulled from the device.  The amount found on the charger is how many amps can be pulled at once. In order to exchange chargers, the amp number on the charger must equal or exceed the amp number recorded on the device’s battery. If a device is paired with a charger which can’t support the amp necessity, it can burn out the power supply and kill the apparatus.

So if you have a modern USB device (smart phone, tablet, or camera) you can plug into a high-amperage USB port and enjoy faster charging (as long as the voltage is equivalent ).  *Site Note: if you have an older device, it might not work with USB interfaces that use the new Battery Charging Specification.

If The Micro USB  Charger’s Voltage Is Not 5v…

Some devices might have their voltage listed with a plus/minus on it like that: 5v +- 5%.  If this is true, you may use a charger rated at 4.75 to 5.25v because that score is telling you is that the device can take 5v minus 5 percent of 5v = 4.75 volts  OR  5v plus 5 percent of 5v = 5.25 volts.  So this means anything between 4.75 t0 5.25v is safe to use (as long as the amperage of the charger is equivalent to or greater than the device’s listed amperage).

An interesting point to note is all chargers supply a higher voltage than the batteries that they charge.  That’s pretty much how they operate.  There has to be a voltage differential to generate the necessary current flow in the correct direction to charge the battery.  When you look at your car, it’s a 12V battery, but typical alternators provide 13.8 to 14.4V charging voltage to the battery.

Stay Away From Cheap Knockoff Chargers

The problem with knockoffs, especially cheap knockoffs, is they often don’t support the energy requirements of the device, or are not built to maintain a steady flow securely.  This can cause damage to the device but can also pose a safety/fire hazard. Overall, it’s best to stay with the charger designed for the device you’re using.

Now You Understand How to Safely & Effectively Swap Chargers

I hope this article was able to assist you.  Now you know how to safely and efficiently use a charger that did not come with your smart phone, laptop, camera, tablet, or other apparatus.  Make certain you follow what we said and you should be good to go!