Iphone 7 Repair Battery

Can You Use Any Charger With Any Cell Phone, Notebook, Camera, or Tablet? 

Every mobile phone, notebook, and tablet appear to come with their own charger.  If you’re like me, you have probably compiled a number of chargers over the years.  So the question becomes: is it safe to use a charger with your phone, laptop, camera, or tablet computer that isn’t the original manufacturer’s charger which came with the device?

Types of Chargers

In this guide, we will concentrate on three types of chargers: laptop chargers, micro USB chargers (these are used with telephones, tablets, and cameras), and Apple Lightning Connectors.  Although some devices have chargers with a slightly different head or charging cable, these are the most common.

Laptop chargers are fairly specific to the device they come with.  However, there may be some generic chargers that boast the capability to be interchanged between laptops.  This always requires changing of this charger”head” and might not be the best charging amperage or voltage for your device.

Micro USBs are theoretically designed to be interchangeable, and are standard in many smartphones, Android apparatus, and tablets.  Micro USB chargers typically have the exact same voltage, but may draw various amps.  I’ll explain this further later and how to know if the charger is safe to use (depending on its listed amps and voltage).

For older devices with a 30-pin charge interface, a connector can be used to control the Lightning Connector.

For a charger to be used on another device, it’s important that the plug  of the charger (the”head”) fit snugly to the charging port of the unit.  Micro USBs are the same across the board so far as charging heads, while laptop chargers are usually specific to both make and model.  However, the plug fitting securely is only one part of the equation.

Somewhere on the power brick of the charger you will get a label with the charger’s voltage (V) and amperage (A).  For other types of chargers, like a smartphone charger, this information is usually located at the base of the charger, in which it would meet the wall.  For the device you’re attempting to charge, the voltage and amperage required will be found on the battery that came with the device or on the manufacturer’s website.

Voltage is how much power the charger will draw into the device, or how much is being”pushed” into the apparatus by the charger.  A phone will usually pull up to around 5V, though a notebook can pull up to 25V.  A charger must equal the voltage required by the device. 

Amperage is how fast power is”pulled” into the device, or how much power is used by the device.  The amount of volts will never change, but the amount of amps that the system pulls may change based on how hard the unit is working.  The number that you locate on the battery that came with your device will be the max amount of amps which may be pulled by the device.  The amount found on the charger is how many amps can be pulled simultaneously. If a device is paired with a charger which can’t support the amp requirement, it may burn out the power source and kill the device.

So for those who have a modern USB device (smart phone, tablet, or camera) you can plug into a high-amperage USB port and enjoy faster charging (as long as the voltage is equal).  *Site Note: if you have an older device, it may not work with USB interfaces that employ the new Battery Charging Specification.

If The Micro USB  Charger’s Voltage Isn’t 5v…

Some devices might have their voltage recorded with a plus/minus on it like that: 5v +- 5%.  If this is true, you may use a charger rated at 4.75 to 5.25v because that score is telling you is that the device can take 5v minus 5% of 5v = 4.75 volts  OR  5v and 5 percent of 5v = 5.25 volts.  So this means anything between 4.75 t0 5.25v is safe to use (as long as the amperage of the charger is equal to or higher than the device’s listed amperage).

An interesting point to note is all chargers supply a higher voltage than the batteries that they charge.  That’s pretty much how they operate.  There needs to be a voltage differential to produce the necessary current flow in the proper direction to charge the battery.  When you look at your car, it has a 12V battery, but average alternators provide 13.8 to 14.4V charging voltage to the battery.

The issue with knockoffs, especially cheap knockoffs, is they often don’t support the power requirements of the device, or aren’t built to maintain a steady flow safely.  This can result in damage to the device but can also pose a safety/fire hazard. Overall, it’s best to stay with the charger made for the device you’re using.

Now You Know How To Safely & Effectively Swap Chargers

I hope this article was able to help you.  Now you know how to safely and efficiently use a charger that did not include your smart phone, laptop, camera, tablet, or other apparatus.  Make certain to follow what we said and you should be good to go!