Iphone 6 Plus Battery Repair

Can You Use Any Charger With Any Mobile Phone, Laptop, Camera, or Tablet? 

Every mobile phone, notebook, and tablet seem to come with their own charger.  If you’re like me, you’ve probably compiled quite a few chargers over the years.  So the question becomes: is it safe to use a charger with your phone, laptop, camera, or tablet computer that isn’t the original manufacturer’s charger that came with the device?

Kinds of Chargers

In this guide, we will focus on three types of chargers: laptop chargers, micro USB chargers (these are used with phones, tablet computers, and cameras), and Apple Lightning Connectors.  While some devices have chargers using a slightly different head or charging cable, these are the most frequent.

Laptop chargers are rather specific to the device they come with.  However, there may be some generic chargers which boast the ability to be interchanged between laptops.  This always requires changing of the charger”head” and may not be the best charging amperage or voltage to your device.

Micro USBs are theoretically designed to be interchangeable, and are standard in most smartphones, Android devices, and tablets.  Micro USB chargers typically have the exact same voltage, but may draw various amps.  I’ll explain this further later and how to know if the charger is safe to use (based on its listed amps and voltage).

Apple Lightning Connectors are standard on all new Apple devices, such as iPads and iPods. For older devices with a 30-pin charge interface, a connector can be used to charge with the Lightning Connector.

In order for a charger for use on a different device, it’s important that the plug  of the charger (the”head”) fit snugly to the charging port of the unit.  Micro USBs are the same across the board so far as charging heads, while notebook chargers are often specific to both make and model.  However, the plug fitting firmly is just one part of the equation.

Determined by the power brick of the charger you’ll get a tag with the charger’s voltage (V) and amperage (A).  For notebook chargers, this charging brick is often halfway down the charger and typically looks exactly like it sounds — a brick. For other types of chargers, like a smartphone charger, this information is usually found at the base of the charger, in which it would meet up with the wall.  For the device you are attempting to control, the voltage and amperage required will be found on the battery that came with the device or on the company’s website.

Voltage is how much power the charger will draw into the device, or how much is being”pushed” into the device by the charger.  A phone will usually pull up to around 5V, while a notebook can pull up to 25V.  A charger must equal the voltage needed by the device. 

Amperage is how fast power is”pulled” into the apparatus, or how much power is used by the device.  The amount of volts will never change, but the quantity of amps that the system pulls may change depending on how hard the device is working.  The number that you find on the battery that came with your device are the max amount of amps that may be pulled by the device.  The number found on the charger is how many amps can be pulled simultaneously. If a device is paired with a charger which can’t support the amp necessity, it may burn out the power source and kill the device.

So for those who have a modern USB device (smart phone, tablet, or camera) you can plug into a high-amperage USB port and enjoy quicker charging (so long as the voltage is equal).  *Website Note: if you have an older device, it may not work with USB interfaces that use the new Battery Charging Specification.

If The Micro USB  Charger’s Voltage Is Not 5v…

Some devices might have their voltage listed with a plus/minus on it like that: 5v +- 5%.  If this is the case, you may use a charger rated at 4.75 to 5.25v because that score is telling you is that the device can take 5v minus 5 percent of 5v = 4.75 volts  OR  5v and 5 percent of 5v = 5.25 volts.  So this means anything between 4.75 t0 5.25v is safe to use (as long as the amperage of the charger is equivalent to or higher than the device’s listed amperage).

An interesting point to note is all chargers supply a higher voltage than the batteries that they charge.  That is pretty much how they work.  There has to be a voltage differential to produce the necessary current flow in the proper way to charge the battery.  If you look at your car, it’s a 12V battery, but average alternators provide 13.8 to 14.4V charging voltage to the battery.

The issue with knockoffs, especially cheap knockoffs, is that they often don’t support the power needs of the device, or aren’t built to keep a steady flow securely.  This can result in damage to the device but can also pose a safety/fire hazard. Overall, it’s best to stay with the charger made for the device you’re using.

Now You Know How To Safely & Effectively Swap Chargers

I hope this article was able to assist you.  Now you know how to safely and effectively use a charger that did not include your smart phone, notebook, camera, tabletcomputer, or other apparatus.  Make certain to follow what we said and you should be good to go!