Can You Use Any Charger With Any Cell Phone, Notebook, Camera, or Tablet?
Every mobile phone, laptop, and tablet seem to come with their own charger. If you’re like me, you have probably compiled quite a few chargers over the years. So the question becomes: is it safe to use a charger with your phone, laptop, camera, or tablet that is not the original manufacturer’s charger which came with the device?
Kinds of Chargers
In this guide, we’ll concentrate on three types of chargers: notebook chargers, micro USB chargers (these are used with phones, tablets, and cameras), and Apple Lightning Connectors. While some devices have chargers with a slightly different head or charging cable, these are the most frequent.
Laptop chargers are fairly specific to the device they include. However, there may be some generic chargers which boast the ability to be interchanged between laptops. This always requires changing of the charger”head” and might not be the optimal charging amperage or voltage for your device.
Micro USBs are designed to be interchangeable, and are standard in most smartphones, Android apparatus, and tablets. Micro USB chargers typically have the exact same voltage, but may draw various amps. I will explain this further later and how to know if the charger is safe to use (depending on its listed amps and voltage).
For older devices with a 30-pin charge port, a connector can be used to control the Lightning Connector.
For a charger to be used on a different device, it’s essential that the plug of the charger (the”head”) fit snugly to the charging port of the device. Micro USBs are the same across the board so far as charging heads, while laptop chargers are usually specific to both make and model. However, the plug fitting firmly is only one part of the equation.
Determined by the power brick of the charger you’ll find a label with the charger’s voltage (V) and amperage (A). For other types of chargers, like a smartphone charger, this information is usually located at the base of the charger, where it would meet the wall. For the device you’re trying to charge, the voltage and amperage required will be found on the battery that came with the device or on the manufacturer’s website.
Voltage is how much power the charger will draw in the apparatus, or just how much is being”pushed” into the apparatus by the charger. A phone will usually pull up to approximately 5V, while a notebook can pull up to 25V. A charger must equal the voltage needed by the device. This is important: drawing too high of a voltage could short out the device and potentially even begin a fire, while too low a voltage will fail to charge the battery.
Amperage is how fast power is”pulled” into the apparatus, or how much power is used by the device. The quantity of volts won’t ever change, but the quantity of amps that the system pulls may change depending on how hard the unit is working. The number that you locate on the battery that came with your device will be the max amount of amps that may be pulled by the device. The amount found on the charger is how many amps can be pulled at once. If a device is paired with a charger that cannot support the amp necessity, it may burn out the power supply and kill the device.
So for those who have a modern USB device (smart phone, tablet, or camera) you can plug into a high-amperage USB port and enjoy quicker charging (so long as the voltage is equivalent ). *Site Note: if you have an older device, it may not work with USB interfaces that use the newest Battery Charging Specification.
If The Micro USB Charger’s Voltage Is Not 5v…
Some devices might have their voltage recorded with a plus/minus on it like this: 5v +- 5%. If this is true, you can use a charger rated at 4.75 to 5.25v because that score is telling you is that the apparatus can take 5v minus 5% of 5v = 4.75 volts OR 5v plus 5% of 5v = 5.25 volts. This means anything between 4.75 t0 5.25v is safe to use (so long as the amperage of the charger is equivalent to or higher than the device’s listed amperage).
An interesting thing to note is all chargers provide a higher voltage than the batteries that they charge. That’s pretty much how they operate. There needs to be a voltage differential to produce the necessary current flow in the correct way to charge the battery. When you look at your car, it’s a 12V battery, but typical alternators provide 13.8 to 14.4V charging voltage to the battery.
The problem with knockoffs, particularly cheap knockoffs, is that they frequently don’t support the power needs of the device, or are not built to maintain a steady flow securely. This can cause damage to the device but can also pose a safety/fire hazard. Overall, it’s better to stick with the charger made for the device you are using.
Now You Understand How to Safely & Effectively Swap Chargers
I hope this article was able to help you. Now you know how to safely and effectively use a charger that did not come with your smart phone, laptop, camera, tabletcomputer, or other apparatus. Be certain to follow exactly what we said and you should be ready to go!