Hybrid Battery Repair In Sri Lanka

Can You Use Any Charger With Any Cell Phone, Notebook, Camera, or Tablet? 

Every cell phone, notebook, and tablet seem to come with their own charger.  If you’re like me, you have probably compiled quite a few chargers over the years.  So the question becomes: is it safe to use a charger with your phone, notebook, camera, or tablet that is not the original manufacturer’s charger which came with the device?

Types of Chargers

In this guide, we will concentrate on three types of chargers: notebook chargers, micro USB chargers (these are used with telephones, tablets, and cameras), and Apple Lightning Connectors.  Although some devices have chargers using a slightly different head or charging cable, these are the most common.

Laptop chargers are fairly unique to the device they come with.  However, there can be some generic chargers that boast the capability to be interchanged between notebooks.  This always requires changing of this charger”head” and might not be the optimal charging amperage or voltage to your device.

Micro USBs are designed to be interchangeable, and are standard in many smartphones, Android apparatus, and tablets.  Micro USB chargers typically have the same voltage, but may draw different amps.  I will explain this further later and how to know whether the charger is safe to use (depending on its recorded amps and voltage).

For older devices with a 30-pin charge port, a connector can be used to control the Lightning Connector.

In order for a charger to be used on a different device, it’s important that the plug  of the charger (the”head”) fit snugly to the charging port of the device.  Micro USBs are the same across the board as far as charging heads, while notebook chargers are usually specific to both make and model.  However, the plug fitting firmly is just one part of this equation.

How Voltage and Amperage Matter

Determined by the power brick of the charger you will find a label with the charger’s voltage (V) and amperage (A).  For laptop chargers, this charging brick is often halfway down the charger and typically looks exactly like it sounds — a brick. For other types of chargers, like a smartphone charger, this information is usually located at the bottom of the charger, in which it would meet the wall.  For the device you are attempting to charge, the voltage and amperage required will be found on the battery that came with the device or on the company’s website.

Voltage is how much power the charger will draw into the device, or how much is being”pushed” to the apparatus by the charger.  A phone will usually pull up to around 5V, though a notebook can pull up to 25V.  A charger must equal the voltage required by the device.  This is important: drawing too high a voltage could short out the device and potentially even begin a fire, while too low a voltage will fail to charge the battery.

Amperage is how fast power is”pulled” to the apparatus, or how much power is used by the device.  The quantity of volts will never change, but the quantity of amps that the device pulls may change depending on how hard the unit is working.  The number that you find on the battery that came with your device are the max amount of amps which may be pulled from the device.  To be able to exchange chargers, the amp number on the charger must equal or exceed the amp number recorded on the device’s battery. If a unit is paired with a charger that cannot support the amp necessity, it may burn out the power source and kill the device.

So for those who have a modern USB device (smart phone, tablet, or camera) you can plug into a high-amperage USB port and enjoy faster charging (so long as the voltage is equivalent ).  *Site Note: if you have an older device, it may not work with USB interfaces that employ the newest Battery Charging Specification.

If The Micro USB  Charger’s Voltage Is Not 5v…

Some devices may have their voltage recorded with a plus/minus on it like this: 5v +- 5%.  If this is the case, you may use a charger rated at 4.75 to 5.25v because that rating is telling you is that the device can take 5v minus 5 percent of 5v = 4.75 volts  OR  5v plus 5 percent of 5v = 5.25 volts. 

An interesting thing to note is all chargers provide a higher voltage than the batteries that they charge.  That’s pretty much how they work.  There has to be a voltage differential to generate the necessary current flow in the proper direction to charge the battery.  If you look at your car, it’s a 12V battery, but typical alternators provide 13.8 to 14.4V charging voltage to the battery.

The issue with knockoffs, especially cheap knockoffs, is they frequently don’t support the energy needs of the device, or aren’t built to maintain a steady flow securely.  This can result in damage to the device but can also pose a safety/fire hazard. Overall, it’s best to stay with the charger made for the device you’re using.

Now You Understand How to Safely & Effectively Swap Chargers

I hope this article was able to help you.  Now you know how to safely and efficiently use a charger that did not include your smart phone, laptop, camera, tablet, or other device.  Be certain to follow exactly what we said and you should be good to go!