Can You Use Any Charger With Any Cell Phone, Laptop, Camera, or Tablet?
Every cell phone, notebook, and tablet seem to come with their own charger. If you are like me, you’ve probably compiled quite a few chargers through the years. So the question becomes: is it safe to use a charger with your phone, laptop, camera, or tablet that is not the original manufacturer’s charger that came with the device?
Kinds of Chargers
In this guide, we’ll focus on three types of chargers: notebook chargers, micro USB chargers (these are used with phones, tablet computers, and cameras), and Apple Lightning Connectors. Although some devices have chargers with a slightly different head or charging cable, these are the most common.
Laptop chargers are rather unique to the device they include. However, there can be some generic chargers that boast the capability to be interchanged between laptops. This always requires changing of the charger”head” and might not be the best charging amperage or voltage for your device.
Micro USBs are designed to be interchangeable, and are standard in many smartphones, Android apparatus, and tablets. Micro USB chargers typically have the same voltage, but may draw different amps. I’ll explain this further later and how to know if the charger is safe to use (depending on its listed amps and voltage).
Apple Lightning Connectors are standard on all new Apple devices, including iPads and iPods. For older devices with a 30-pin charge interface, a connector can be used to charge with the Lightning Connector.
For a charger for use on a different device, it’s important that the plug of the charger (the”head”) fit securely into the charging port of the device. Micro USBs are the same across the board as far as charging heads, while laptop chargers are usually specific to both make and model. However, the plug fitting securely is only one part of the equation.
Determined by the power brick of the charger you will find a label with the charger’s voltage (V) and amperage (A). For other types of chargers, like a smartphone charger, this information is usually located at the bottom of the charger, in which it would meet up with the wall. For the device you’re attempting to control, the voltage and amperage required will be found on the battery that came with the device or on the company’s website.
Voltage is how much power the charger will draw in the device, or just how much is being”pushed” to the apparatus by the charger. A phone will usually pull up to around 5V, though a notebook can pull up to 25V. A charger must equal the voltage required by the device. This is important: drawing too high a voltage could short out the device and potentially even begin a fire, while too low a voltage will fail to charge the battery.
Amperage is how quickly power is”pulled” to the device, or how much power is used by the device. The quantity of volts won’t ever change, but the amount of amps that the device pulls may change based on how hard the unit is working. The number that you find on the battery that came with your device are the max amount of amps that may be pulled from the device. The number found on the charger is how many amps can be pulled simultaneously. If a device is paired with a charger that cannot support the amp necessity, it can burn out the power supply and kill the apparatus.
So if you have a modern USB device (smart phone, tabletcomputer, or camera) you can plug into a high-amperage USB port and enjoy quicker charging (as long as the voltage is equivalent ). *Site Note: if you have an older device, it may not work with USB interfaces that use the newest Battery Charging Specification.
If The Micro USB Charger’s Voltage Isn’t 5v…
Some devices may have their voltage listed with a plus/minus on it like that: 5v +- 5%. If this is true, you can use a charger rated at 4.75 to 5.25v because that rating is telling you is that the apparatus can take 5v minus 5 percent of 5v = 4.75 volts OR 5v plus 5 percent of 5v = 5.25 volts. This means anything between 4.75 t0 5.25v is safe to use (as long as the amperage of the charger is equal to or higher than the device’s listed amperage).
An interesting thing to note is all chargers provide a higher voltage than the batteries they charge. That is pretty much how they operate. There needs to be a voltage differential to generate the necessary current flow in the correct direction to charge the battery. If you look at your vehicle, it has a 12V battery, but average alternators provide 13.8 to 14.4V charging voltage to the battery.
Stay Away From Cheap Knockoff Chargers
The issue with knockoffs, especially cheap knockoffs, is that they frequently don’t support the energy requirements of the device, or aren’t built to maintain a steady flow safely. Overall, it’s better to stick with the charger made for the device you are using.
Now You Understand How to Safely & Effectively Swap Chargers
I hope this article was able to assist you. Now you know how to safely and efficiently use a charger that did not include your smart phone, laptop, camera, tabletcomputer, or other device. Make certain to follow what we said and you should be good to go!