How To Fix Iphone 4S Battery

Can You Use Any Charger With Any Cell Phone, Laptop, Camera, or Tablet? 

Every mobile phone, laptop, and tablet seem to come with their own charger.  If you are like me, you’ve probably compiled quite a few chargers through the years.  So the question becomes: is it safe to use a charger with your phone, laptop, camera, or tablet computer that is not the original manufacturer’s charger that came with the device?

Types of Chargers

In this guide, we will focus on three types of chargers: notebook chargers, micro USB chargers (these are used with telephones, tablets, and cameras), and Apple Lightning Connectors.  While some devices have chargers using a slightly different head or charging cable, these are the most frequent.

Laptop chargers are fairly unique to the device they come with.  However, there may be some generic chargers that boast the capability to be interchanged between laptops.  This always requires changing of this charger”head” and may not be the optimal charging amperage or voltage to your device.

Micro USBs are designed to be interchangeable, and are standard in most smartphones, Android apparatus, and tablets.  Micro USB chargers typically have the exact same voltage, but may draw different amps.  I’ll explain this further later and how to know if the charger is safe to use (based on its listed amps and voltage).

Apple Lightning Connectors are standard on all new Apple devices, such as iPads and iPods. For older devices using a 30-pin charge interface, a connector can be used to charge with the Lightning Connector.

The Plugs Must Be The Same

In order for a charger for use on another device, it’s essential that the plug  of the charger (the”head”) fit snugly to the charging port of the device.  Micro USBs are the same across the board so far as charging heads, whilst notebook chargers are often specific to both make and model.  However, the plug fitting firmly is only one part of the equation.

How Voltage and Amperage Matter

Somewhere on the power brick of the charger you will find a label with the charger’s voltage (V) and amperage (A).  For notebook chargers, this charging brick is often halfway down the charger and typically looks exactly like it sounds — a brick. For other types of chargers, like a smartphone charger, this information is usually located at the bottom of the charger, in which it would meet the wall.  For the device you’re trying to control, the voltage and amperage required will be found on the battery that came with the device or on the company’s website.

Voltage is how much power the charger will draw into the apparatus, or how much is being”pushed” into the device by the charger.  A phone will usually pull up to approximately 5V, though a laptop can pull up to 25V.  A charger must equal the voltage required by the device. 

Amperage is how quickly power is”pulled” into the device, or how much electricity is used by the device.  The amount of volts won’t ever change, but the quantity of amps that the device pulls may change based on how hard the unit is working.  The number that you find on the battery that came with your device will be the maximum amount of amps which can be pulled from the device.  The number found on the charger is how many amps can be pulled simultaneously. If a device is paired with a charger that cannot support the amp requirement, it may burn out the power supply and kill the device.

So for those who have a modern USB device (smart phone, tabletcomputer, or camera) you can plug into a high-amperage USB port and enjoy quicker charging (as long as the voltage is equivalent ).  *Site Note: if you have an older device, it might not work with USB ports that use the new Battery Charging Specification.

If The Micro USB  Charger’s Voltage Isn’t 5v…

Some devices might have their voltage listed using a plus/minus on it like that: 5v +- 5%.  If this is true, you can use a charger rated at 4.75 to 5.25v because that score is telling you is that the apparatus can take 5v minus 5% of 5v = 4.75 volts  OR  5v and 5% of 5v = 5.25 volts. 

An interesting thing to note is all chargers supply a higher voltage than the batteries they charge.  That’s pretty much how they operate.  There has to be a voltage differential to produce the necessary current flow in the correct direction to charge the battery.  If you look at your vehicle, it’s a 12V battery, but average alternators provide 13.8 to 14.4V charging voltage to the battery.

The issue with knockoffs, especially cheap knockoffs, is that they often don’t support the energy needs of the apparatus, or aren’t built to keep a steady flow securely.  This can result in damage to the device but can also pose a safety/fire hazard. Overall, it’s better to stay with the charger made for the device you are using.

Now You Know How To Safely & Effectively Swap Chargers

I hope this article was able to help you.  Now you know how to safely and effectively use a charger that did not include your smart phone, laptop, camera, tablet, or other device.  Be sure to follow exactly what we said and you should be ready to go!