Fix Iphone Battery

Can You Use Any Charger With Any Mobile Phone, Notebook, Camera, or Tablet? 

Every mobile phone, laptop, and tablet appear to come with their own charger.  If you’re like me, you have probably compiled quite a few chargers through the years.  So the question becomes: is it safe to use a charger with your phone, laptop, camera, or tablet that isn’t the original manufacturer’s charger which came with the device?

Kinds of Chargers

In this guide, we’ll focus on three types of chargers: laptop chargers, micro USB chargers (these are used with telephones, tablet computers, and cameras), and Apple Lightning Connectors.  Although some devices have chargers with a slightly different head or charging cable, these are the most frequent.

Laptop chargers are fairly unique to the device they come with.  However, there can be some generic chargers that boast the ability to be interchanged between notebooks.  This always requires changing of this charger”head” and may not be the best charging amperage or voltage to your device.

Micro USBs are designed to be interchangeable, and are standard in most smartphones, Android apparatus, and tablets.  Micro USB chargers typically have the same voltage, but may draw different amps.  I will explain this further later and how to know whether the charger is safe to use (depending on its listed amps and voltage).

Apple Lightning Connectors are standard on all new Apple devices, including iPads and iPods. For older devices with a 30-pin charge port, a connector can be used to charge with the Lightning Connector.

For a charger to be used on another device, it’s important that the plug  of the charger (the”head”) fit securely into the charging port of the unit.  Micro USBs are the same across the board so far as charging heads, while notebook chargers are usually specific to both make and model.  However, the plug fitting securely is only one part of the equation.

Somewhere on the power brick of the charger you’ll find a tag with the charger’s voltage (V) and amperage (A).  For other types of chargers, like a smartphone charger, this information is usually located at the bottom of the charger, in which it would meet the wall.  For the device you are attempting to control, the voltage and amperage required will be seen on the battery that came with the device or on the manufacturer’s website.

Voltage is how much power the charger will draw in the device, or just how much is being”pushed” to the apparatus by the charger.  A phone will usually pull up to around 5V, while a notebook can pull up to 25V.  A charger must equal the voltage required by the device.  This is important: drawing too high a voltage could short out the device and potentially even begin a fire, while too low a voltage will fail to charge the battery.

Amperage is how quickly power is”pulled” into the apparatus, or how much electricity is used by the device.  The amount of volts will never change, but the amount of amps that the device pulls may change based on how hard the device is working.  The number that you find on the battery that came with your device will be the maximum amount of amps which may be pulled from the device.  In order to exchange chargers, the amp number on the charger must equal or exceed the amp number listed on the device’s battery. If a device is paired with a charger which can’t support the amp requirement, it may burn out the power source and kill the apparatus.

So if you have a modern USB device (smart phone, tabletcomputer, or camera) you can plug into a high-amperage USB port and enjoy quicker charging (so long as the voltage is equal).  *Website Note: if you have an older device, it might not work with USB interfaces that employ the newest Battery Charging Specification.

If The Micro USB  Charger’s Voltage Isn’t 5v…

Some devices might have their voltage recorded with a plus/minus on it like this: 5v +- 5%.  If this is true, you may use a charger rated at 4.75 to 5.25v because that score is telling you is that the device can take 5v minus 5% of 5v = 4.75 volts  OR  5v and 5 percent of 5v = 5.25 volts.  So this means anything between 4.75 t0 5.25v is safe to use (so long as the amperage of the charger is equivalent to or greater than the device’s listed amperage).

An interesting thing to note is chargers provide a higher voltage than the batteries they charge.  That’s pretty much how they operate.  There needs to be a voltage differential to generate the necessary current flow in the proper direction to charge the battery.  When you look at your vehicle, it has a 12V battery, but typical alternators provide 13.8 to 14.4V charging voltage to the battery.

Stay Away From Cheap Knockoff Chargers

The problem with knockoffs, particularly cheap knockoffs, is they frequently don’t support the energy needs of the apparatus, or are not built to maintain a steady flow securely.  This can cause damage to the device but can also pose a safety/fire hazard. Overall, it’s better to stick with the charger made for the device you’re using.

Now You Know How To Safely & Effectively Swap Chargers

I hope this article was able to help you.  Now you know how to safely and efficiently use a charger that did not include your smart phone, notebook, camera, tablet, or other device.  Be sure you follow exactly what we said and you should be ready to go!