Can You Use Any Charger With Any Cell Phone, Notebook, Camera, or Tablet?
Every mobile phone, laptop, and tablet seem to come with their own charger. If you’re like me, you’ve probably compiled a number of chargers through the years. So the question becomes: is it safe to use a charger with your phone, laptop, camera, or tablet that isn’t the original manufacturer’s charger that came with the device?
Kinds of Chargers
In this guide, we’ll concentrate on three types of chargers: laptop chargers, micro USB chargers (these are used with telephones, tablet computers, and cameras), and Apple Lightning Connectors. Although some devices have chargers using a slightly different head or charging cable, these are the most common.
Laptop chargers are fairly specific to the device they come with. However, there may be some generic chargers which boast the ability to be interchanged between laptops. This always requires changing of this charger”head” and might not be the optimal charging amperage or voltage for your device.
Micro USBs are theoretically designed to be interchangeable, and are standard in many smartphones, Android devices, and tablets. Micro USB chargers typically have the exact same voltage, but may draw various amps. I’ll explain this further later and how to know if the charger is safe to use (depending on its recorded amps and voltage).
Apple Lightning Connectors are standard on all new Apple devices, including iPads and iPods. For older devices with a 30-pin charge interface, a connector can be used to control the Lightning Connector.
The Plugs Must Be The Same
For a charger for use on a different device, it’s essential that the plug of the charger (the”head”) fit snugly to the charging port of the unit. Micro USBs are the same across the board as far as charging heads, while notebook chargers are often specific to both make and model. However, the plug fitting firmly is just one part of the equation.
Somewhere on the power brick of the charger you will find a tag with the charger’s voltage (V) and amperage (A). For other types of chargers, like a smartphone charger, this information is usually found at the base of the charger, in which it would meet up with the wall. For the device you’re trying to charge, the voltage and amperage required will be found on the battery that came with the device or on the company’s website.
Voltage is how much power the charger will draw into the device, or how much is being”pushed” into the device by the charger. A phone will usually pull up to around 5V, though a notebook can pull up to 25V. A charger must equal the voltage required by the device. This is important: drawing too high a voltage could short out the device and potentially even start a fire, while too low a voltage will fail to charge the battery.
Amperage is how fast power is”pulled” to the apparatus, or how much power is used by the device. The quantity of volts won’t ever change, but the amount of amps that the device pulls may change depending on how hard the device is working. The number that you locate on the battery that came with your device are the maximum amount of amps that may be pulled by the device. To be able to exchange chargers, the amp number on the charger must equal or exceed the amp number recorded on the device’s battery. If a device is paired with a charger which can’t support the amp necessity, it may burn out the power source and kill the device.
So if you have a modern USB device (smart phone, tabletcomputer, or camera) you can plug into a high-amperage USB port and enjoy quicker charging (so long as the voltage is equal). *Website Note: if you have an older device, it may not work with USB ports that employ the new Battery Charging Specification.
If The Micro USB Charger’s Voltage Is Not 5v…
Some devices may have their voltage recorded with a plus/minus on it like that: 5v +- 5%. If this is true, you can use a charger rated at 4.75 to 5.25v because that rating is telling you is that the device can take 5v minus 5 percent of 5v = 4.75 volts OR 5v and 5 percent of 5v = 5.25 volts. So this means anything between 4.75 t0 5.25v is safe to use (so long as the amperage of the charger is equivalent to or greater than the device’s listed amperage).
An interesting thing to note is chargers supply a higher voltage than the batteries that they charge. That is pretty much how they work. There has to be a voltage differential to produce the necessary current flow in the proper way to charge the battery. When you look at your car, it’s a 12V battery, but typical alternators provide 13.8 to 14.4V charging voltage to the battery.
Stay Away From Cheap Knockoff Chargers
The problem with knockoffs, especially cheap knockoffs, is they frequently don’t support the power needs of the apparatus, or are not built to keep a steady flow safely. Overall, it’s best to stay with the charger made for the device you are using.
Now You Know How To Safely & Effectively Swap Chargers
I hope this article was able to help you. Now you know how to safely and efficiently use a charger that did not include your smart phone, notebook, camera, tablet, or other device. Make sure you follow exactly what we said and you should be ready to go!