Dewalt 36 Volt Battery Repair

Can You Use Any Charger With Any Cell Phone, Notebook, Camera, or Tablet? 

Every mobile phone, laptop, and tablet appear to come with their own charger.  If you’re like me, you have probably compiled quite a few chargers through the years.  So the question becomes: is it safe to use a charger with your phone, laptop, camera, or tablet that is not the original manufacturer’s charger which came with the device?

Types of Chargers

In this article, we will concentrate on three types of chargers: notebook chargers, micro USB chargers (these are used with telephones, tablet computers, and cameras), and Apple Lightning Connectors.  Although some devices have chargers using a slightly different head or charging cable, these are the most frequent.

Laptop chargers are rather specific to the device they include.  However, there can be some generic chargers that boast the capability to be interchanged between notebooks.  This always requires changing of this charger”head” and might not be the best charging amperage or voltage to your device.

Micro USBs are designed to be interchangeable, and are standard in most smartphones, Android devices, and tablets.  Micro USB chargers typically have the same voltage, but may draw various amps.  I’ll explain this further later and how to know whether the charger is safe to use (based on its listed amps and voltage).

For older devices using a 30-pin charge port, a connector can be used to charge with the Lightning Connector.

The Plugs Must Be The Same

In order for a charger to be used on a different device, it’s important that the plug  of the charger (the”head”) fit securely into the charging port of the unit.  Micro USBs are the same across the board so far as charging heads, whilst notebook chargers are usually specific to both make and model.  However, the plug fitting securely is just one part of the equation.

Somewhere on the power brick of the charger you’ll get a tag with the charger’s voltage (V) and amperage (A).  For other types of chargers, like a smartphone charger, this information is usually found at the base of the charger, where it would meet the wall.  For the device you are trying to control, the voltage and amperage required will be seen on the battery that came with the device or on the manufacturer’s website.

Voltage is how much power the charger will draw into the device, or just how much is being”pushed” into the apparatus by the charger.  A phone will usually pull up to approximately 5V, while a notebook can pull up to 25V.  A charger must equal the voltage required by the device.  This is important: drawing too high of a voltage could short out the device and potentially even begin a fire, while too low a voltage will fail to charge the battery.

Amperage is how fast power is”pulled” to the apparatus, or how much power is used by the device.  The quantity of volts will never change, but the amount of amps that the system pulls may change depending on how hard the device is working.  The number that you locate on the battery that came with your device are the max amount of amps which may be pulled by the device.  If a device is paired with a charger that cannot support the amp necessity, it may burn out the power supply and kill the apparatus.

So for those who have a modern USB device (smart phone, tabletcomputer, or camera) you can plug into a high-amperage USB port and enjoy faster charging (so long as the voltage is equivalent ).  *Website Note: if you have an older device, it might not work with USB ports that use the new Battery Charging Specification.

If The Micro USB  Charger’s Voltage Isn’t 5v…

Some devices may have their voltage recorded with a plus/minus on it like that: 5v +- 5%.  If this is true, you may use a charger rated at 4.75 to 5.25v because that rating is telling you is that the device can take 5v minus 5% of 5v = 4.75 volts  OR  5v and 5% of 5v = 5.25 volts.  This means anything between 4.75 t0 5.25v is safe to use (so long as the amperage of the charger is equivalent to or higher than the device’s listed amperage).

An interesting point to note is chargers provide a higher voltage than the batteries that they charge.  That’s pretty much how they work.  There needs to be a voltage differential to produce the necessary current flow in the proper direction to charge the battery.  When you look at your vehicle, it’s a 12V battery, but average alternators provide 13.8 to 14.4V charging voltage to the battery.

Stay Away From Cheap Knockoff Chargers

The problem with knockoffs, especially cheap knockoffs, is that they often don’t support the power needs of the apparatus, or aren’t built to maintain a steady flow safely.  Overall, it’s best to stick with the charger made for the device you’re using.

Now You Know How To Safely & Effectively Swap Chargers

I hope this article was able to help you.  Now you know how to safely and efficiently use a charger that did not include your smart phone, laptop, camera, tabletcomputer, or other device.  Make sure you follow what we said and you should be ready to go!