Can You Use Any Charger With Any Cell Phone, Laptop, Camera, or Tablet?
Every mobile phone, notebook, and tablet seem to come with their own charger. If you are like me, you’ve probably compiled quite a few chargers over the years. So the question becomes: is it safe to use a charger with your phone, laptop, camera, or tablet computer that isn’t the original manufacturer’s charger which came with the device?
Kinds of Chargers
In this article, we’ll focus on three types of chargers: laptop chargers, micro USB chargers (these are used with telephones, tablet computers, and cameras), and Apple Lightning Connectors. While some devices have chargers using a slightly different head or charging cable, these are the most common.
Laptop chargers are rather specific to the device they include. However, there may be some generic chargers which boast the capability to be interchanged between notebooks. This always requires changing of the charger”head” and might not be the optimal charging amperage or voltage to your device.
Micro USBs are theoretically designed to be interchangeable, and are standard in most smartphones, Android devices, and tablets. Micro USB chargers typically have the same voltage, but may draw various amps. I will explain this further later and how to know whether the charger is safe to use (depending on its recorded amps and voltage).
Apple Lightning Connectors are standard on all new Apple devices, including iPads and iPods. For older devices using a 30-pin charge interface, a connector can be used to control the Lightning Connector.
For a charger for use on a different device, it’s important that the plug of the charger (the”head”) fit securely into the charging port of the device. Micro USBs are the same across the board so far as charging heads, whilst laptop chargers are usually specific to both make and model. However, the plug fitting firmly is only 1 part of the equation.
Determined by the power brick of the charger you will get a label with the charger’s voltage (V) and amperage (A). For other types of chargers, like a smartphone charger, this information is usually located at the base of the charger, in which it would meet up with the wall. For the device you are attempting to control, the voltage and amperage required will be seen on the battery that came with the device or on the company’s website.
Voltage is how much power the charger will draw in the device, or how much is being”pushed” to the device by the charger. A phone will usually pull up to around 5V, though a laptop can pull up to 25V. A charger must equal the voltage required by the device.
Amperage is how fast power is”pulled” to the device, or how much electricity is used by the device. The amount of volts will never change, but the amount of amps that the device pulls may change depending on how hard the device is working. The number that you find on the battery that came with your device are the max amount of amps that may be pulled by the device. If a unit is paired with a charger which can’t support the amp requirement, it may burn out the power source and kill the apparatus.
So for those who have a modern USB device (smart phone, tablet, or camera) you can plug into a high-amperage USB port and enjoy faster charging (so long as the voltage is equivalent ). *Website Note: if you have an older device, it may not work with USB ports that use the new Battery Charging Specification.
If The Micro USB Charger’s Voltage Is Not 5v…
Some devices may have their voltage recorded with a plus/minus on it like that: 5v +- 5%. If this is the case, you may use a charger rated at 4.75 to 5.25v because that score is telling you is that the device can take 5v minus 5% of 5v = 4.75 volts OR 5v and 5% of 5v = 5.25 volts.
An interesting thing to note is chargers supply a higher voltage than the batteries they charge. That is pretty much how they operate. There has to be a voltage differential to produce the necessary current flow in the proper way to charge the battery. When you look at your car, it has a 12V battery, but average alternators provide 13.8 to 14.4V charging voltage to the battery.
Stay Away From Cheap Knockoff Chargers
The problem with knockoffs, especially cheap knockoffs, is they often don’t support the power needs of the apparatus, or aren’t built to maintain a steady flow safely. Overall, it’s best to stay with the charger designed for the device you’re using.
Now You Know How To Safely & Effectively Swap Chargers
I hope this article was able to help you. Now you know how to safely and efficiently use a charger that did not come with your smart phone, laptop, camera, tablet, or other device. Be certain you follow exactly what we said and you should be ready to go!