Bosch Al 3640 Cv 36V Battery Charger Repair

Can You Use Any Charger With Any Mobile Phone, Notebook, Camera, or Tablet? 

Every cell phone, notebook, and tablet seem to come with their own charger.  If you’re like me, you’ve probably compiled a number of chargers over the years.  So the question becomes: is it safe to use a charger with your phone, laptop, camera, or tablet computer that is not the original manufacturer’s charger which came with the device?

Kinds of Chargers

In this guide, we will focus on three types of chargers: notebook chargers, micro USB chargers (these are used with telephones, tablet computers, and cameras), and Apple Lightning Connectors.  Although some devices have chargers with a slightly different head or charging cable, these are the most frequent.

Laptop chargers are fairly unique to the device they include.  However, there can be some generic chargers which boast the ability to be interchanged between laptops.  This always requires changing of this charger”head” and might not be the best charging amperage or voltage for your device.

Micro USBs are theoretically designed to be interchangeable, and are standard in many smartphones, Android devices, and tablets.  Micro USB chargers typically have the same voltage, but may draw different amps.  I will explain this further later and how to know whether the charger is safe to use (based on its listed amps and voltage).

For older devices with a 30-pin charge interface, a connector can be used to control the Lightning Connector.

In order for a charger for use on a different device, it’s essential that the plug  of the charger (the”head”) fit securely into the charging port of the device.  Micro USBs are the same across the board as far as charging heads, while notebook chargers are usually specific to both make and model.  However, the plug fitting firmly is only one part of the equation.

How Voltage and Amperage Matter

Somewhere on the power brick of the charger you’ll find a tag with the charger’s voltage (V) and amperage (A).  For laptop chargers, this charging brick is often halfway down the charger and typically looks exactly like it sounds — a brick. For other types of chargers, like a smartphone charger, this information is usually found at the bottom of the charger, where it would meet up with the wall.  For the device you’re trying to charge, the voltage and amperage required will be found on the battery that came with the device or on the company’s website.

Voltage is how much power the charger will draw in the device, or just how much is being”pushed” into the apparatus by the charger.  A phone will usually pull up to approximately 5V, while a laptop can pull up to 25V.  A charger must equal the voltage needed by the device. 

Amperage is how fast power is”pulled” into the device, or how much power is used by the device.  The amount of volts won’t ever change, but the amount of amps that the device pulls may change based on how hard the unit is working.  The number that you locate on the battery that came with your device are the maximum amount of amps that may be pulled from the device.  The amount found on the charger is how many amps can be pulled at once. If a unit is paired with a charger that cannot support the amp necessity, it may burn out the power supply and kill the apparatus.

So if you have a modern USB device (smart phone, tablet, or camera) you can plug into a high-amperage USB port and enjoy faster charging (as long as the voltage is equivalent ).  *Website Note: if you have an older device, it might not work with USB interfaces that use the new Battery Charging Specification.

If The Micro USB  Charger’s Voltage Is Not 5v…

Some devices may have their voltage listed with a plus/minus on it like that: 5v +- 5%.  If this is true, you may use a charger rated at 4.75 to 5.25v because that score is telling you is that the apparatus can take 5v minus 5 percent of 5v = 4.75 volts  OR  5v plus 5% of 5v = 5.25 volts.  This means anything between 4.75 t0 5.25v is safe to use (as long as the amperage of the charger is equivalent to or higher than the device’s listed amperage).

An interesting thing to note is all chargers supply a higher voltage than the batteries they charge.  That’s pretty much how they work.  There needs to be a voltage differential to produce the necessary current flow in the correct way to charge the battery.  If you look at your vehicle, it’s a 12V battery, but average alternators provide 13.8 to 14.4V charging voltage to the battery.

The issue with knockoffs, particularly cheap knockoffs, is that they often don’t support the energy requirements of the device, or aren’t built to keep a steady flow safely.  This can result in damage to the device but can also pose a safety/fire hazard. Overall, it’s better to stay with the charger made for the device you are using.

Now You Understand How to Safely & Effectively Swap Chargers

I hope this article was able to assist you.  Now you know how to safely and efficiently use a charger that did not come with your smart phone, laptop, camera, tablet, or other apparatus.  Make sure to follow exactly what we said and you should be ready to go!