Battery Repair Phone

Can You Use Any Charger With Any Mobile Phone, Notebook, Camera, or Tablet? 

Every mobile phone, notebook, and tablet seem to come with their own charger.  If you’re like me, you’ve probably compiled a number of chargers over the years.  So the question becomes: is it safe to use a charger with your phone, laptop, camera, or tablet computer that is not the original manufacturer’s charger which came with the device?

Types of Chargers

In this article, we’ll concentrate on three types of chargers: notebook chargers, micro USB chargers (these are used with phones, tablet computers, and cameras), and Apple Lightning Connectors.  Although some devices have chargers using a slightly different head or charging cable, these are the most common.

Laptop chargers are rather specific to the device they come with.  However, there may be some generic chargers that boast the ability to be interchanged between notebooks.  This always requires changing of this charger”head” and might not be the best charging amperage or voltage to your device.

Micro USBs are designed to be interchangeable, and are standard in most smartphones, Android devices, and tablets.  Micro USB chargers typically have the same voltage, but may draw different amps.  I’ll explain this further later and how to know whether the charger is safe to use (based on its recorded amps and voltage).

Apple Lightning Connectors are standard on all new Apple devices, including iPads and iPods. For older devices using a 30-pin charge interface, a connector can be used to control the Lightning Connector.

The Plugs Must Be The Same

For a charger to be used on another device, it’s essential that the plug  of the charger (the”head”) fit snugly to the charging port of the unit.  Micro USBs are the same across the board so far as charging heads, while notebook chargers are often specific to both make and model.  However, the plug fitting securely is just one part of the equation.

How Voltage and Amperage Matter

Determined by the power brick of the charger you’ll find a label with the charger’s voltage (V) and amperage (A).  For other types of chargers, like a smartphone charger, this information is usually located at the bottom of the charger, where it would meet the wall.  For the device you’re trying to control, the voltage and amperage required will be found on the battery that came with the device or on the company’s website.

Voltage is how much power the charger will draw in the device, or how much is being”pushed” to the device by the charger.  A phone will usually pull up to around 5V, while a laptop can pull up to 25V.  A charger must equal the voltage required by the device.  This is important: drawing too high a voltage could short out the device and potentially even start a fire, while too low a voltage will fail to charge the battery.

Amperage is how fast power is”pulled” into the device, or how much electricity is used by the device.  The quantity of volts won’t ever change, but the quantity of amps that the device pulls may change depending on how hard the device is working.  The number that you find on the battery that came with your device are the maximum amount of amps that can be pulled by the device.  To be able to swap chargers, the amp number on the charger must equal or exceed the amp number recorded on the device’s battery. If a device is paired with a charger which can’t support the amp necessity, it can burn out the power supply and kill the device.

So for those who have a modern USB device (smart phone, tabletcomputer, or camera) you can plug into a high-amperage USB port and enjoy quicker charging (so long as the voltage is equal).  *Website Note: if you have an older device, it may not work with USB interfaces that use the new Battery Charging Specification.

If The Micro USB  Charger’s Voltage Is Not 5v…

Some devices might have their voltage listed using a plus/minus on it like that: 5v +- 5%.  If this is true, you may use a charger rated at 4.75 to 5.25v because that score is telling you is that the device can take 5v minus 5 percent of 5v = 4.75 volts  OR  5v plus 5 percent of 5v = 5.25 volts. 

An interesting thing to note is all chargers provide a higher voltage than the batteries they charge.  That is pretty much how they operate.  There has to be a voltage differential to generate the necessary current flow in the correct direction to charge the battery.  When you look at your car, it has a 12V battery, but typical alternators provide 13.8 to 14.4V charging voltage to the battery.

Stay Away From Cheap Knockoff Chargers

The problem with knockoffs, especially cheap knockoffs, is that they frequently don’t support the power needs of the apparatus, or aren’t built to maintain a steady flow securely.  Overall, it’s best to stay with the charger made for the device you’re using.

Now You Understand How to Safely & Effectively Swap Chargers

I hope this article was able to assist you.  Now you know how to safely and efficiently use a charger that did not come with your smart phone, notebook, camera, tabletcomputer, or other apparatus.  Be sure to follow exactly what we said and you should be good to go!